STEREOTAXIC DRILLS


Micromotor Drill

Micromotor technology puts the motor in the hand piece yet maintains a slender profile

High Speed Drilling with Easy Positioning

Micromotor technology allows the hand piece itself to contain the motor, yet still maintain a slender profile for easy hand grip.

The high speed drill (up to 38,000 rpm) is configured for stereotaxic surgery, particularly in soft skull animals such as neonatal rats and mice. It’s perfect for use with the 51725 Just for Mice™ Stereotaxic.

The compact control includes switches for Power On/Off, Forward or Reverse Rotation, with Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box, or with the foot pedal. An Overload Protector Light turns red and sounds a small beeping alarm when the motor stalls. The back of the control box has a convenient voltage selector switch for operating in either 110 or 220 volt — no need to specify 220 volt when ordering.

Drill bits included:

Head Dia. mm

.2
.5
.7
.79
1.0
2.1
2.35

Head Length mm

.2
.4
.5
.5
.8
1.9
2.1


Flexibe Shaft Drill, Hang-up Style

Powerful motor and flexible shaft offer very low vibration and noise

May be mounted on all Lab Standard™ and other Stereotaxic Instruments

A Lab Standard™ drill for over 20 years. The powerful motor and flexible shaft offer very low vibration and noise for long-term, reliable performance. The motor may be suspended from the optional 58652 Motor Support with Table Clamp.

The heavy metal foot pedal allows exact speed control, and does not slide away from your foot. An optional, 58651 Hand- Dialed Speed control is available for use with, or without, a foot switch.

The drill includes motor, foot pedal, 1/2" handpiece with 3/32" collet, standard for dental drill bits, and a wrench for changing the collet.

Optional 51633, Large Probe Holder table clamp holder is available for hands-free operation.

Optional 58654 Collet kit includes 1/32", 1/16", 3/32" and 1/8" (used for grinding bits from many manufacturers) collets.

Optional 58656 handpiece and stand includes a heavy-duty handpiece with Jacobs® Chuck for bits up to 5/32", and a table clamp holder for hands-free operation. The heavy-duty handpiece fits the end of the flexible shaft, and is easily interchanged.

Catalog number 58655V is 220 Volt and CE approved.


Dremel Moto-Tool

A versatile hand-held tool for general lab preparations

A versatile hand-held drill for skull openings, or to cut and grind stainless steel hypodermic tubing. Operates at variable speeds up to 30,000 RPM. Features permanently lubricated bronze bearings. All items pictured are included.

Kit Contents:

3000 Series VS Rotary Tool

Classic Storage Case

Circle Cutter Attachment

24 Assorted Accessories

1/8" Collet Included (capacity 1/32" - 1/8")

Accessories Included:

High Speed Cutter

Fiberglass Reinforced Cut-Off Wheels (x2)

Silicone Carbide Grinding Stone

Aluminum Oxide Grinding Stone (932, 952)

Brush Wheel

Carbon Steel Brush

1/2" Felt Polishing Wheel (x2)

Small Polishing Compound

1" Felt Polishing Wheel

½” Sanding Drum w/Mandrel - 60 Grit

½” Sanding Drum - 60 Grit (2)

½” Sanding Drum - 120 Grit (2)

½” Sanding Drum - 240 Grit (2)

Mandrel

Mandrel with Screw

Dressing Stone

1/4" 120 grit Sand Bands

1/4" 240 grit Sand Bands

1/4" Sanding Drum

Drill Bits & Accessories

Carbide drill bits, cutting wheels, dental cement and other Stereotaxic Surgery related accessories

High quality carbide drill bits cut cleaner and retain sharp edges longer.

Suitable for use with the 58650 Flexible Shaft Drill, and the 51449 Micromotor Drill. Spherical heads, variety of sizes. Packages of 6 bits (all the same size).

A must for cutting or shaping stainless steel tubing for custom cannulas, knives or syringes.

A diamond disc cuts (rather than grinds) its way through stainless steel tubing. The result is a fast, clean cut with little heat generation and no burrs to remove. Tubing is free of obstruction and ready for use immediately after cutting.

A standard in stereotaxic surgery requiring implantation

Use to affix stainless steel to skull or bone, for lab repairs, or for casting of hard acrylic parts. Particularly useful for securing bone anchor screws in skull holes or cementing cannulae in place.

Dental cement can be cut, drilled or ground. Mixture is exothermic.

Kit includes 1 pound of dental cement, 8 oz. of solvent, and the kit pictured above.


Cordless Micro Drill

Can function for up to 8 hours on a single charge

Can function for 8 hours on a single charge.

The Cordless Micro Drill is designed for research applications that require surgical bits. Made of lightweight aluminum alloy for balance and control, the Micro Drill is powered by a rechargeable 6-volt nickel cadmium battery, and can function for up to 8 hours under normal operating conditions. Speed is 14,400 RPM.

Included Components

The Micro Drill comes with a hard plastic case with die-cut foam for convenient storage, a recharger, and 5 carbide steel burrs with ball sizes of 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, and 1.6 mm. Carbide burr drill bits have a shaft diameter of 2.3 mm and are 4.4 cm in length. No special tools are necessary to change burrs. A set of 5 assorted burrs is available separately.

Drill and Injection Robot for Motorized Stereotaxic Instruments

Software Driven Drilling and Injection

The Drill and Injection Robot provides for a fully software driven solution to stereotaxic surgery. The Drill and Injection Robot allows for high precision injection. Recalibration after drilling no longer needed! After loading the syringe, the injection robot allows for multiple injections in different animlas without tool exchange or recalibration!


Portable Micromotor High-Speed Drill with Drill Bits

New portable micromotor with pocket/pouch-size control unit has built-in lithium-ion rechargeable battery for the ultimate in portability. The control unit features a digital RPM display at the top that makes it easy to monitor speed as you work. The dial on the front adjusts speed from 0-30,000 RPM.

Run time is approximately 5 hours. Battery charge time is 3 hours.

The handpiece has a twist release rotary type collet of 3/32 inches.

Optional plastic carry case with custom laser cut protective foam insert available (51555-2)

Optional woven nylon lightweight carrying pouch available (51555-1)

Bone Anchor Screws

Ensure that Dental Cement (Cranial Plaster) attaches appropriately in Stereotaxic placement of cannulae

Bone Anchor Screws anchor cannulae or other chronically-attached appliances to skull. Ideal for use in ensuring that Dental Cement (Cranial Plaster) attaches appropriately in Stereotaxic Surgeries. For appropriate hole size use drill bit 51455-5 Stainless Steel Screws #0-80, 1.59 mm O.D., 3.2 mm long. Package of 1